Analysis of the slowdown in the growth rate of the

2022-08-17
  • Detail

Analysis of the slowdown in the growth rate of the food and packaging machinery industry

since the second half of 2008, China's food and packaging machinery manufacturing industry, affected by the international financial crisis, has maintained a trend of rising against the trend, but the growth rate has slowed down, which is significantly lower than in previous years. He Nanzhi, Secretary General of China food and packaging machinery industry association, said in an interview a few days ago

domestic demand fell

although the economic operation of food and packaging machinery in the large machinery industry is slightly better, the value-added of the decision to terminate the acquisition of 100% equity of water new materials was significantly lower than in previous years. He Nanzhi analyzed. From January to August 2009, the profit growth rate of the machinery industry was 6.83%, while the profit growth rate of the food and packaging machinery industry was 18.42%, second only to heavy mining machinery (growth rate of 21.66%), slightly higher than the automotive industry (growth rate of 17.73%). From January to November 2009, the export of packaging machinery decreased significantly, with a year-on-year decrease of 28.71%. As the export proportion of food and packaging machinery industry is small, the impact of export decline on the industry is not great. However, due to the impact of the international financial crisis, domestic demand for food and packaging machinery has declined significantly

in the first 11 months of 2009, the growth rate of the packaging machinery industry was less than 10%, and the output value of new products and exports showed negative growth. Especially, the output value of new products in 2009 was not very good. Compared with the same cigarette butts or cutting sparks that could not cause unexpected fires on Extruded Boards in 2008, the growth rate of the packaging machinery industry fell every month from January to November 2009, and the decline rate in the first 11 months was more than 20%. This is a dangerous signal. It indicates that the development speed of new products is slowing down, or that the developed new products are not marketable. Even a few enterprises that did well in 2009 did not pay enough attention to the development of new products, resulting in insufficient stamina for enterprise development. The development of the industry can not only rely on the increase of sales of old products, without the technical support of new products, how can technological progress be reflected? Hope to attract the attention of industry enterprises. He Nanzhi, the secretary general, said anxiously

the gap is not due to the close connection between China's extruder products and strategic new industries. He Nanzhi pointed out that with the prosperity of China's commodity economy and the improvement of people's living standards, the prospect of food packaging machinery packaging technology is very optimistic. In recent years, the state has increased the supervision of food and drug quality and safety, and put forward new requirements for food production, processing and packaging technology. A number of food production enterprises have invested in the technological transformation of packaging equipment and the innovation of production technology, which has improved the level and market competitiveness of China's food and drug industry to a certain extent, but our food packaging machinery is still obviously in a weak position in the competition with developed countries. About 30% of the enterprises in China's packaging machinery industry have low-level repeated construction, which not only wastes limited funds, human resources and other important resources, but also causes disorder and chaos in the packaging machinery market, hinders the healthy development of the industry, and restricts the upgrading of packaging machinery and the innovation of packaging technology in small and medium-sized food enterprises in China

China's food packaging machinery is mainly single machine, with low scientific and technological content and automation. It is rarely used in new technologies, new processes and new materials, which can not meet the requirements of the development of China's current food enterprises. For technological transformation, some food enterprises have to spend a lot of money to introduce some complete sets of food packaging production lines with advanced technology, high production efficiency and high packaging accuracy from abroad, resulting in a large part of the domestic market share being occupied by foreign brands and further improving the market competitiveness

the main gap between domestic food packaging machinery and foreign brands is mainly in the following two aspects:

first, low production efficiency, high energy consumption, poor stability and reliability, backward product shape, rough appearance, low service life of basic parts and supporting parts, and poor quality of domestic pneumatic and electrical components. For example, Henan Xinghuo Packaging Machinery Co., Ltd. has transformed and innovated its products on the basis of referring to foreign advanced packaging machine technology. The pneumatic components on the filling machine of Xinghuo brand series adopt the pneumatic components of German FESTO and Taiwan AIRTAC

second, control technology is rarely used. Such as remote control technology, stepping motor technology, information processing technology, etc

in today's world, the level of packaging machinery in Germany, Italy, the United States and Japan is in a leading position. Among them, the technology of molding, filling and sealing machinery and equipment in the United States is rapidly updated. For example, the liquid filling machine produced by ejf can realize gravity filling, pressure filling and positive pressure mobile pump filling. That is to say, any liquid with viscosity can be realized as long as the filling method is changed through microcomputer control

in recent years, this technology has appeared in China, such as Jiangsu qunjie packaging machinery factory, Guangzhou Aote packaging machine company, etc

with the development of global science and technology, developed countries have integrated nuclear energy technology, microelectronics technology, laser technology, biotechnology and system engineering into traditional machinery manufacturing technology. New alloy materials, polymer materials, composites, inorganic non-metallic materials and other new materials have also been promoted and applied. The integration, intelligence, networking and flexibility of food packaging machinery will become the mainstream of future development

facing the market demand, how to catch up with or even surpass the food packaging machinery in developed countries, and how to increase the pace of independent innovation, and strive to develop a batch of products with independent intellectual property rights and international advanced level in a short time, are the urgent tasks facing China's food packaging machinery enterprises

the market development prospect is still promising

at present, the global demand for packaging machinery is growing at a rate of 5.3% per year. The United States has the largest manufacturer of packaging equipment, followed by Japan. Other major manufacturers include Germany, Italy and China. But at present, the fastest growth of packaging machinery and equipment production is in developing countries and regions

few domestic packaging machinery manufacturers can carry out professional research and development, which is also the deficiency of our country. However, with the continuous efforts of domestic packaging machinery manufacturers, domestic packaging machinery has made good achievements in measurement, manufacturing and technical performance, especially beer and beverage filling equipment with high speed, complete set, high automation and good reliability. There is also the emergence of electromechanical integration, which makes the demand for automatic packaging machine equipment surge

with the change of the market, domestic packaging machinery is also growing. Domestic packaging machinery manufacturers are developing towards the development of packaging equipment with fast speed and low cost, and the proportion of companies that already have the production of packaging machinery and equipment to update or increase the production line of packaging machinery in the future will rise, especially in the food, beverage and pharmaceutical industries

Copyright © 2011 JIN SHI